Results 1 to 2 of 2
  1. #1
    Join Date
    Aug 2016
    Location
    Algeria
    Age
    27
    Posts
    3
    Rep Power
    0

    Exclamation LG Multi-split system LM-3065H3L issue



    Hi,

    I have an LG multi-split (one condenser feeding 3 indoor units) model : LM-3065H3L
    the problem is only one unit blowing cold air. the other 2 units blow just an ambient air temperature. on the outside unit only 2 piping seem to get cold and wet, obviously the only two piping feeding the working indoor unit. other two piping seem warm with no refrigerant flowing on them. I'm new on this system, i believe (not sure) the outdoor unit has only one compressor in it and each indoor unit should call for refrigerant when cooling is needed in that room. please to correct me if I'm wrong.

    before going to the hassle of dismantling everything and troubleshooting I'd appreciate if someone can help me out to save energy and time with suggestions on where to look.. i couldn't find any technical manual on the internet that explains how does multi-split system technically work. so i can get an idea on what may be causing this issue.

    thank you !
    Last edited by mbarizia; 11-08-2017 at 02:10 PM.



  2. #2
    Join Date
    Aug 2014
    Location
    Australia
    Age
    29
    Posts
    68
    Rep Power
    4

    Re: LG Multi-split system LM-3065H3L issue

    LG are notorious for sensor faults.
    Could have dodgey air sensors on indoor units, try swapping it from the good one to see what happens.
    If the sensors think the room temp is low they will not call for cooling.

    Cheers,
    Keza

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •