Results 1 to 4 of 4
  1. #1
    Join Date
    Aug 2017
    Location
    United Kingdom
    Posts
    2
    Rep Power
    0

    Rittal SK 3304.100 blows warm air



    Hi, hope someone can help before I shell out the £520 call out fee for Rittal to visit & diagnose...

    I have a CNC machine that has a Rittal SK 3304.100 mounted on the elec cabinet door, the fans blowing but the air coming out is warm, can someone advise what this could be and how I can get it fixed without a massive call out fee?

    Thanks in advance, Jon



  2. #2
    Join Date
    Sep 2010
    Location
    Dorset
    Age
    76
    Posts
    209
    Rep Power
    16

    Re: Rittal SK 3304.100 blows warm air

    Are there any alarms showing on the controller?

    Unit doesn't appear too complicated according to the manual, might be worth while trying a local air conditioning or refrigeration company.

    Copy manual here if needed. http://bit.ly/2vBmUpr
    Brian, retired in Devon.

  3. #3
    Join Date
    Sep 2003
    Location
    ISRAEL
    Age
    72
    Posts
    4,266
    Rep Power
    46

    Re: Rittal SK 3304.100 blows warm air

    I have dealt with them in the past. Their common problem is the compressor. They usually use a small rotary compressor 230 volt. Have it checked first as the shell is under discharge pressure and it gets up to 120 C which heat the winding to a very high temp.

  4. #4
    Join Date
    Aug 2017
    Location
    United Kingdom
    Posts
    2
    Rep Power
    0

    Re: Rittal SK 3304.100 blows warm air

    Thanks for the help, I have a local refrigeration company calling tomorrow, will pass on this info, fingers crossed...

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •