Results 1 to 3 of 3
  1. #1
    Join Date
    Aug 2009
    Location
    INDIA
    Age
    30
    Posts
    3
    Rep Power
    0

    Freezeking Compressor FK450 High Speed Seal Leakage



    IMG-20170513-WA0006.jpg
    Hello Sir & Freinds,
    Here I am facing a typical problem on Site i.e Compressor Seal Leakage.
    Its a brand new compressor from Freezeking i.e FK-450 on which I have installed Ice Candy Plant with Single Brine with 6 Store's.
    IMG-20170513-WA0004.jpg

    Brine Tank maintain temp. @ -25C

    Basic Problem is that its spring get lose and rubber got shrink over the shaft and start leavening oil & gas. In period of 3 month more then 4 time it has happen please suggest to tackle this problem.
    Here also Enclosing you with our entire plant Video Link.




  2. #2
    Join Date
    Dec 2007
    Location
    australia
    Posts
    2,460
    Rep Power
    27

    Re: Freezeking Compressor FK450 High Speed Seal Leakage

    Rahul,
    Sounds like annoying problem you have!

    What refrigerant & type of oil are you using on this job?
    Also what pressures suction & discharge, suction superheat.
    Is oil level in compressor always at correct level?
    Have you asked Freezeking for any advice?

  3. #3
    Join Date
    Aug 2009
    Location
    INDIA
    Age
    30
    Posts
    3
    Rep Power
    0

    Re: Freezeking Compressor FK450 High Speed Seal Leakage

    Refrigerant -R22
    Oil - Mineral Oil 68 No.Frezol
    Suction Pressure :28 Approx (wary with Temp.) when Brine Temp. at -15C
    Discharge Pressure : 230 Approx. (Wary with Temp.)
    Suction Super Heat: 0C (Approx)
    Oil Level : Up to Mark even Oil Separator too.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •