Need very basic help wiring my Compressor.

[jpdraven]

00707_1qI04T1GC35_1200x900.jpg

Hi all. I am in really desperate need of help in 5 year old terminology here wiring a compressor that the original power cable and respective connections were removed and tossed BEFORE the new Start Relay, Overload Protector, and Capacitor were installed and now I am stuck.

I have a brand new Embraco FFU 80AK EB2EDSUQ W10439638 Embraco P/N 513200888UA.4 Compressor with all new Start Relay, Overload Protector, and Capacitor.

I need to know what wires need to be connected to which terminals, including the capacitor. I am lost. I can find a diagram chowing my unit anywhere.
Embraco's website has diagrams BUT does not say what wires connect to what devices or in laymans terms, Connect neutral wire to start relay, power to overload protector, capacitor goes to X & Y etc etc etc.

Mind you I will be using the power wire from the 3Gallon Compressor I bought since the Fridge Power Cable is gone.

Can anyone help me make sense of this so I don;t connect the wires wrong and blow the compressor?

Any help would be unbelievably appreciated.

When I remove the Start Relay and Overload Protector there are 3 prongs in a Y shape.... 2 on top, 1 on bottom

PLEASE HELP! Thank you so much guys