Results 1 to 9 of 9

Threaded View

  1. #1
    Join Date
    Apr 2010
    Location
    Čakovec, Croatia
    Age
    42
    Posts
    3
    Rep Power
    0

    Reciprocating Compressor - Process Tube for Oil Return (from oil separator)?

    Greetings!

    As stated in the title, I'm considering using the process tube as an oil return line from the oil separator. Now it has occurred to me that this might cause a hydraulic knock in the compressor.
    The separator is at the HP side. Picture attached.HPNP.jpg

    It is for my own experimental project

    Any thoughts?

    Compressor: Tecumseh AK5515ES , Retrofitted to R134a
    Oil Separator: EKS OS-1012 2,3L - float valve activated

    Last edited by Icer_CRO; 15-05-2017 at 08:02 PM.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •