Results 1 to 16 of 16

Thread: A recent Job

  1. #1
    Join Date
    Oct 2003
    Location
    Belgium
    Age
    62
    Posts
    5,645
    Rep Power
    34

    A recent job



    Our latest work.
    Counter in and out the trailer.
    Panel made by my son.
    Attached Images Attached Images
    Last edited by Peter_1; 05-03-2006 at 02:53 PM.


    It's better to keep your mouth shut and give the impression that you're stupid than to open it and remove all doubt.

  2. #2
    Join Date
    Oct 2003
    Location
    Belgium
    Age
    62
    Posts
    5,645
    Rep Power
    34

    Re: A recent job

    Some more pictures.
    Job wasn't completely finished.The fans are now partially covered with Corian.

    The enclosure for the compressor section is standing open just behind the inclined condensor with 3 circuits in it: counter, cooling rooms and airco.

    One of the windows is open, the switches are for the fans in case there's failing one.

    Fans are fed via a safety 220 VAC/220VAC transformer (humidity)
    Attached Images Attached Images
    Last edited by Peter_1; 05-03-2006 at 02:52 PM.
    It's better to keep your mouth shut and give the impression that you're stupid than to open it and remove all doubt.

  3. #3
    Join Date
    Oct 2003
    Location
    Belgium
    Age
    62
    Posts
    5,645
    Rep Power
    34

    Re: A recent job

    As usual..it all has to fit in a very narrow space.
    The counter was test running, you can see the frost on the plate.
    Underneath the counter are 2 probes for controlling the temperature.
    Attached Images Attached Images
    Last edited by Peter_1; 05-03-2006 at 02:50 PM.
    It's better to keep your mouth shut and give the impression that you're stupid than to open it and remove all doubt.

  4. #4
    Join Date
    Sep 2005
    Location
    uk
    Age
    53
    Posts
    504
    Rep Power
    21

    Re: A recent job

    Nice. is it just me or are the sol valves downstream of the driers?
    Takes a licking, keeps on ticking.

  5. #5
    Join Date
    Oct 2003
    Location
    Belgium
    Age
    62
    Posts
    5,645
    Rep Power
    34

    Re: A recent job

    Euh.. sure...are you mounting those the other way perhaps

    So you pump down each time your drier and sightglass in ice with every stop you make?

    Why you're doing it the other way? I don't see it.
    It's better to keep your mouth shut and give the impression that you're stupid than to open it and remove all doubt.

  6. #6
    Join Date
    Sep 2005
    Location
    uk
    Age
    53
    Posts
    504
    Rep Power
    21

    Re: A recent job

    so you can pump over and change the drier
    Takes a licking, keeps on ticking.

  7. #7
    Join Date
    Oct 2003
    Location
    Belgium
    Age
    62
    Posts
    5,645
    Rep Power
    34

    Re: A recent job

    It's better to keep your mouth shut and give the impression that you're stupid than to open it and remove all doubt.

  8. #8
    Join Date
    Oct 2003
    Location
    Belgium
    Age
    62
    Posts
    5,645
    Rep Power
    34

    Re: A recent job

    Lichuan,

    What do you mean with practical result of the finished product?

    AndHow about the offset with your target of the system?

    We do many things without calculating, more by experience, these things grow while installing them.
    Of course, we calculate many things but not everything.

    What are you interested in specific?
    It's better to keep your mouth shut and give the impression that you're stupid than to open it and remove all doubt.

  9. #9
    Join Date
    Dec 2004
    Location
    Weihai,China
    Posts
    807
    Rep Power
    20

    Re: A recent job

    Hi peter,
    Sorry not to make myself clear on the expression
    I mean : the difference between what your customer need and what you supply, if you've not done it before,i think you need make some calculation.Maybe you've already got the experience ,it should be no problem.

    thanks and regards
    LC
    I hear...I forget;I see...I remember;I do...I understand

  10. #10
    Join Date
    May 2006
    Location
    china
    Posts
    98
    Rep Power
    18

    Re: A recent Job

    Great job!Peter, a beautiful and mobility refrigerated display vehicle. I found the pipes before evap is very complex, does it have heat recovery?

  11. #11
    Join Date
    Apr 2001
    Location
    UK
    Posts
    2,119
    Rep Power
    26

    Re: A recent Job

    Excelllent job Peter, As Ive said, bring this unit over to UK for a promotional tour

  12. #12
    Join Date
    Feb 2009
    Location
    bruges
    Age
    45
    Posts
    42
    Rep Power
    0

    Re: A recent job

    ziet er goed uit me likes )

    i am a fan

  13. #13
    Join Date
    Aug 2008
    Location
    ireland
    Posts
    75
    Rep Power
    16

    Re: A recent Job

    Heel goed!

  14. #14
    Join Date
    Jul 2009
    Location
    South Africa
    Age
    78
    Posts
    196
    Rep Power
    17

    Re: A recent Job

    Ek smaak jou werk baie boet.

  15. #15
    Join Date
    Feb 2008
    Location
    manchester
    Posts
    80
    Rep Power
    17

    Re: A recent job

    Quote Originally Posted by slingblade View Post
    Nice. is it just me or are the sol valves downstream of the driers?
    sol valves should always be after drier it can shatter the drier particals

  16. #16
    Join Date
    Jun 2009
    Location
    saudia arabian
    Age
    53
    Posts
    28
    Rep Power
    0

    Re: A recent Job

    good job,it up
    keep

Similar Threads

  1. A recent job
    By Lc_shi in forum Industrial
    Replies: 0
    Last Post: 06-03-2006, 10:15 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •