Results 1 to 6 of 6
  1. #1
    Join Date
    Apr 2017
    Location
    INDIA
    Posts
    4
    Rep Power
    0

    ar12kv5hbwknna SAMSUNG AIRCONDITIONER- Need option code from remote



    Hi Guys
    I have Samsung airconditioner Model ar12kv5hbwknna. Could someone kindly send me the option code for my model. or if possible Service manual for my Model. Thanks in advance.

    Sandeep.



  2. #2
    Join Date
    Apr 2017
    Location
    INDIA
    Posts
    4
    Rep Power
    0

    Re: ar12kv5hbwknna SAMSUNG AIRCONDITIONER- Need option code from remote

    The Sequences being Auto on 00; Cool On 00; Dry on 00; Fan on 00; Heat on 00; Auto Off 00;Cool Off 00; Dry off 00; Fan off 00; Heat off 00:

  3. #3
    Join Date
    Apr 2017
    Location
    INDIA
    Posts
    4
    Rep Power
    0

    Re: ar12kv5hbwknna SAMSUNG AIRCONDITIONER- Need option code from remote

    guys just updating I have put the option code for AR12HSFNBWK/ET (0)10005 (1)56A37 (2)72328 (3)72534. The unit is cooling, But now the display on indoor unit not showing. any help?

  4. #4
    Join Date
    Aug 2016
    Location
    Algeria
    Age
    34
    Posts
    3
    Rep Power
    0

    Re: ar12kv5hbwknna SAMSUNG AIRCONDITIONER- Need option code from remote

    found a solution for this? i have the same issue but with model : AR12KPFUFGMYSO

  5. #5
    Join Date
    Apr 2017
    Location
    INDIA
    Posts
    4
    Rep Power
    0

    Re: ar12kv5hbwknna SAMSUNG AIRCONDITIONER- Need option code from remote

    Not the complete solution as my display is still not showing. I tried with different option codes corresponding to a different AR12 models. The cooling is acheived but display does not show.

  6. #6
    Join Date
    Sep 2007
    Location
    Split Croatia
    Age
    57
    Posts
    6,175
    Blog Entries
    6
    Rep Power
    36

    Re: ar12kv5hbwknna SAMSUNG AIRCONDITIONER- Need option code from remote

    Smart Install mode
    This model supports Smart Install mode which checks installation status to find out if there is any problems with any of the
    functions
    . Execute Smart Install mode after installation .
    1 .
    Check the installation status of the air conditioner
    .
    1)
    Check the power supply, service valve (if it's open), power cable of the indoor and outdoor unit and amount of
    additional refrigerant required for pipe extension .
    2)
    Status of the indicator after supplying the power : Standby status
    2 .
    When the air conditioner is in standby status, use the remote controller to start the Smart Install mode
    .
    1)
    Press the [SET], [Mode], [Power] button simultaneously for 4 seconds
    .
    f
    f
    Smart Install mode can be operated only with the supplied remote controller
    .
    f
    f
    During the Smart install mode procedure, remote controller cannot be operated

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •