Results 1 to 10 of 10
-
21-04-2017, 10:26 PM #1
Single screw compressor McQuay HSW205QY27YA
Good afternoon. Already known problem. The check valve was torn off. The valve head fell and damaged the spool and rotor. I polished the valve and its saddle. It is necessary to assemble the compressor. But there is no IOM. I know how to expose the gaps of satellites. But where to look an axial backlash on a rotor - I do not know. I ask for help.
https://www.instagram.com/p/BSbaa7NBvCo/
Link to my instagram. There are all the photos of the dismantling and repair of the compressor.
-
22-04-2017, 11:28 AM #2
Re: Single screw compressor McQuay HSW205QY27YA
0.003 / 0.004 inches
https://m.youtube.com/watch?v=2YuMIV-1MeE
-
22-04-2017, 02:36 PM #3
Re: Single screw compressor McQuay HSW205QY27YA
How to expose the gap of the stars is I know. I know what shim set on the rotor. But I do not know where to look the gap on the rotor.
-
22-04-2017, 02:38 PM #4
Re: Single screw compressor McQuay HSW205QY27YA
-
22-04-2017, 02:41 PM #5
Re: Single screw compressor McQuay HSW205QY27YA
-
22-04-2017, 02:42 PM #6
Re: Single screw compressor McQuay HSW205QY27YA
Where to watch the rotor clearance?
-
22-04-2017, 09:11 PM #7
Re: Single screw compressor McQuay HSW205QY27YA
IMG_1965.jpgGap is between star and casing (area shown centre of your "rotor" photograph) (the smooth flat surface directly beside the main rotor)
Last edited by HVACRsaurus; 22-04-2017 at 09:14 PM.
-
22-04-2017, 10:29 PM #8
Re: Single screw compressor McQuay HSW205QY27YA
Thank you - I know about this break. The rupture of stars is regulated by round gaskets. And I'm interested in the gap, which is regulated by semi-circular gaskets.
-
22-04-2017, 11:01 PM #9
Re: Single screw compressor McQuay HSW205QY27YA
-
23-04-2017, 08:57 AM #10
Re: Single screw compressor McQuay HSW205QY27YA
This is another compressor. The design is different.