Results 1 to 4 of 4
  1. #1
    Join Date
    Mar 2016
    Location
    IRAN
    Posts
    107
    Rep Power
    2

    Thickness of fins



    Hi friends,

    Do you know what is usual thickness of fin of DX evaporator and condenser of most of companies ?

    Sincerely yours.



  2. #2
    Join Date
    Nov 2014
    Location
    Australia
    Age
    24
    Posts
    16
    Rep Power
    0

    Re: Thickness of fins

    there is no "usual thickness". It greatly depends on the application e.i. low temp have wider spacing and medium temp evaps have closer spacing.

  3. #3
    Join Date
    Mar 2016
    Location
    IRAN
    Posts
    107
    Rep Power
    2

    Re: Thickness of fins

    Quote Originally Posted by thebrockenshire View Post
    there is no "usual thickness". It greatly depends on the application e.i. low temp have wider spacing and medium temp evaps have closer spacing.
    Hi my friend,

    Sorry, There is misunderstanding. My mean is not FPI (Fin per inch) that at low temperature we should use lower FPI on evaporators.
    My mean is exactly thickness of aluminum fins.

    Sincerely yours.

  4. #4
    Join Date
    Aug 2007
    Location
    Russia
    Posts
    306
    Rep Power
    14

    Re: Thickness of fins

    It depends on the heat exchanger geometry. The thickness may be 0.1; 0.13;0.16;0.18;0.21.....0.4mm.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •