Daikin VRV lV fire panel stop

[gozoboy]

Hi, I have a Daikin VRV lV installed in a very small hotel. Recently the owners asked if there is a way to shut down the system if there is fire alarm. I know this can be done with the iTouch controller but this is quite expensive and would be a total waste as they just need that function. Is there any interface that can be connected to a volt free contact on the fire panel that will make the system shut down?

Thanks in advance.

[frank]

In short...yes there is.

I would contact your local Daikin service centre who can recommend the right solution to your particular installation.

KRP2A comes to mind

[gozoboy]

Done that already but was told that the cheapeast option is the iTouch. So I was looking for another opinion. Thanks for your help Frank.

[install monkey]

buy the additional indoor terminal block with the t1 t2 contacts - open circuit stops indoor but u need to daisy chain it on all indoors- and change setting mode 13 to auto restart- or stick a contactor on the indoor ring main- not ideal but will keep fireman sam happy.

[eggs]

...or stick a contactor on the indoor ring main- not ideal but will keep fireman sam happy.

This.

[gozoboy]

Yep, sometimes I just forget the 'keep it simple, stupid' solutions.

Many thanks to all.