Results 1 to 5 of 5
  1. #1
    Join Date
    Jan 2017
    Location
    Macedonia
    Posts
    7
    Rep Power
    0

    Scotsman ACM 45 Ice maker



    Hi guys, I am new to this forum. I want to ask for help, I have ACM 45 for repair, but it wont start. After I plug in to the power, only the green led is on (the unit is under power) and nothing more. I also checked all fuses, there are two 16A one from 500mA but they are ok. Also the switch is to position for cooling/operating.
    Last edited by najdo; 20-01-2017 at 09:09 PM.



  2. #2
    Brian_UK's Avatar
    Brian_UK is offline Moderator I am starting to push the Mods: of RE Site Moderator : and general nice guy
    Join Date
    Mar 2001
    Location
    Dorset
    Age
    76
    Posts
    11,192
    Rep Power
    60

    Re: Scotsman ACM 45 Ice maker

    Don't know the machine myself but have you followed the correct start up procedure?

    Manual here...

    https://www.google.co.uk/url?sa=t&so...ObqJ0pTZNBs7sw
    Brian - Newton Abbot, Devon, UK
    Retired March 2015

  3. #3
    Join Date
    Jan 2017
    Location
    Macedonia
    Posts
    7
    Rep Power
    0

    Re: Scotsman ACM 45 Ice maker

    Yep I have tried that. Also to say, when I went to see the ice maker, he was working but it had problems with the defrost (the cubes were not falling in the container, probably damaged electromagnetic valve for bypass of the heat from condenser) so I took it home to repair it but when I plug it , it wont start.

  4. #4
    Join Date
    Sep 2007
    Location
    Split Croatia
    Age
    57
    Posts
    6,175
    Blog Entries
    6
    Rep Power
    36

    Re: Scotsman ACM 45 Ice maker

    What is ambient temperature?
    What is pressure of water supply?
    Did you checked that there are no siphon at drain line.
    Did you checked that water inlet solenoid valve is getting power?
    Did you correctly adjusted operation selection switch on PCB to operation position according to instalation manual?
    Did you checked that all connectors are firmly inserted to PCB?
    Last edited by nike123; 21-01-2017 at 11:17 AM.

  5. #5
    Join Date
    Jan 2017
    Location
    Macedonia
    Posts
    7
    Rep Power
    0

    Re: Scotsman ACM 45 Ice maker

    The ambient temperature and the temperature of the water is fine (those things with numbers are in the manual). Other things I checked and they are also fine, but I didnt checked the water inlet solenoid valve. I will do it now.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •