Results 1 to 10 of 10

Thread: Daikin DX unit

  1. #1
    Join Date
    Mar 2011
    Location
    Dublin
    Age
    36
    Posts
    55
    Rep Power
    14

    Daikin DX unit



    Hey guys, would you have a wiring diagram for two boards *I'm at a unit, a Hi-Velocity HV-100BU AHU indoor with a RZQ140B8W1B outdoor. Complaint it won't heat but I can't get the condenser to run. Only details I see are FBQ35-60B7V1 and an EC9509D. Any ideas? Calling for full heat but the condenser just sits there.
    Attached Images Attached Images



  2. #2
    Brian_UK's Avatar
    Brian_UK is offline Moderator I am starting to push the Mods: of RE Site Moderator : and general nice guy
    Join Date
    Mar 2001
    Location
    Dorset
    Age
    76
    Posts
    11,025
    Rep Power
    60

    Re: Daikin DX unit

    Has the RZQ unit had the software updated? B series had poor inverter/fan control.
    Brian - Newton Abbot, Devon, UK
    Retired March 2015

  3. #3
    Join Date
    Oct 2001
    Location
    Nottingham UK
    Posts
    5,668
    Rep Power
    51

    Re: Daikin DX unit

    Quote Originally Posted by eire1 View Post
    Hey guys, would you have a wiring diagram for two boards *I'm at a unit, a Hi-Velocity HV-100BU AHU indoor with a RZQ140B8W1B outdoor. Complaint it won't heat but I can't get the condenser to run. Only details I see are FBQ35-60B7V1 and an EC9509D. Any ideas? Calling for full heat but the condenser just sits there.
    I've installed and serviced/repaired lots of Daikin but can't understand your setup?

    Hi-Velocity HV-100BU AHU...not familiar with this

    with a RZQ140B8W1B outdoor...not sure how you can pair this with the AHU?

    FBQ35-60B7V1 and an EC9509D...this doesn't make any sense?

    Do you have different model numbers so far away from those in England?

  4. #4
    Join Date
    Mar 2011
    Location
    Dublin
    Age
    36
    Posts
    55
    Rep Power
    14

    Re: Daikin DX unit

    Doubt it, it was our 1st time on site today and the unit looks like it hasn't been serviced in a good good while.

  5. #5
    Join Date
    Mar 2011
    Location
    Dublin
    Age
    36
    Posts
    55
    Rep Power
    14

    Re: Daikin DX unit

    It's a Daikin condenser used as a heat pump to a coil on an AHU. The controllers are April Air, AHU is Hi-Velocity. It's the strangest set up I've ever seen. They're both wired into a panel with 2 Daikin boards. The 2 codes are the only info I can see on the boards.

  6. #6
    Brian_UK's Avatar
    Brian_UK is offline Moderator I am starting to push the Mods: of RE Site Moderator : and general nice guy
    Join Date
    Mar 2001
    Location
    Dorset
    Age
    76
    Posts
    11,025
    Rep Power
    60

    Re: Daikin DX unit

    I've seen these set ups before, condenser feeding the ahu coil using the pcb control board from a daikin unit, sort of worked.
    Brian - Newton Abbot, Devon, UK
    Retired March 2015

  7. #7
    Join Date
    Oct 2001
    Location
    Nottingham UK
    Posts
    5,668
    Rep Power
    51

    Re: Daikin DX unit

    That's the ERQ model condenser and AHU controller

  8. #8
    Join Date
    Mar 2001
    Location
    ireland
    Age
    53
    Posts
    1,450
    Rep Power
    41

    Re: Daikin DX unit

    Its a board from a ducted unit i think, hi velocity units, bunch of them installed here, quare ****e. First check you have correct voltage at outdoor, and that neutral is properly connected. Indoor stat feeds to board to call outdoor, can you hook a standard daikin controller to the indoor board and test run unit?
    Mostly found in the southern part of this green and pleasant land.

  9. #9
    Join Date
    Oct 2001
    Location
    Nottingham UK
    Posts
    5,668
    Rep Power
    51

    Re: Daikin DX unit


  10. #10
    Join Date
    Jan 2017
    Location
    Hong Kong
    Age
    34
    Posts
    3
    Rep Power
    0

    Re: Daikin DX unit

    Quote Originally Posted by eire1 View Post
    Hey guys, would you SEO have a wiring diagram for two boards *I'm at a unit, a Hi-Velocity HV-100BU AHU indoor with a RZQ140B8W1B outdoor. Complaint it won't heat but I can't get the condenser to run. Only details I see are FBQ35-60B7V1 and an EC9509D. Any ideas? Calling for full heat but the condenser just sits there.
    thanks for sharing
    Last edited by alicechan11; 22-03-2017 at 05:28 AM.

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •