Results 1 to 6 of 6

Hybrid View

  1. #1
    Join Date
    May 2006
    Location
    Las Vegas, Nevada USA
    Age
    66
    Posts
    12
    Rep Power
    0

    Pressure to Temperature Conversion

    I have found online calculators for water/vapor pressure, and temperature to pressure conversion calculators. However, I need to find out what the temperature of Water/Vapor will be at a specific pressure.

    Does anyone know of an online conversion calculator for Pressure to Temperature?

  2. #2
    Join Date
    Aug 2005
    Location
    USA
    Posts
    5,326
    Rep Power
    25

    Re: Pressure to Temperature Conversion

    Joe,

    Is this what you are looking for?

    If it is, let me know and I can convert the pressure units or temperature into the units desired.

    Or, I can provide the curve fit equation if this would be more helpful.
    Attached Files Attached Files

  3. #3
    Joepompous's Avatar
    Joepompous Guest

    Re: Pressure to Temperature Conversion

    I am looking for what temperature in degrees fahrenheit would a fixed volume of gas need to be heated to in order to double its pressure if it starts out at 25 degrees fahrenheit

  4. #4
    Join Date
    Aug 2009
    Location
    New Zealand
    Age
    59
    Posts
    2,556
    Rep Power
    26

    Re: Pressure to Temperature Conversion

    Quote Originally Posted by Joepompous View Post
    I am looking for what temperature in degrees fahrenheit would a fixed volume of gas need to be heated to in order to double its pressure if it starts out at 25 degrees fahrenheit
    Thinking back to my school days (Eve was my teacher and Adam was the head master)
    If "V" is constant then

    p1t1=p2t2 (boyles law i think?, but I think not?)

  5. #5
    Join Date
    May 2006
    Location
    Las Vegas, Nevada USA
    Age
    66
    Posts
    12
    Rep Power
    0

    Re: Pressure to Temperature Conversion

    Looks good.

    Let me ask, if I have the following data:

    889.25 mmHg (17.198 psi) at 104.4 ºC - (220ºF)

    for a 1/2" copper pipe and I drop the pressure by increasing the pipe dimension to 1", 2", 3"...etc... would my pressure drop by half each time? If not, at what rate can I expect a pressure drop (percentage) 25%, 10% etc...

    I hope my question clearer than mud.

    Speaking of mud, do you recall that guy from Thailand asking questions about making an air conditioner from a refrigerator?

    Well, if all goes well with this project, it would be a portion of a passive solar cooling unit that would work very as well in the tropics as it would in the Las Vegas desert.

  6. #6
    Join Date
    Oct 2008
    Location
    mallorca, spain,
    Age
    75
    Posts
    770
    Rep Power
    19

    Re: Pressure to Temperature Conversion

    hi jo , what type of gas and is it just vapour or is there any liquid gas apparent ?

Similar Threads

  1. CARE refigerants by BOC
    By dogma in forum Refrigerants
    Replies: 8
    Last Post: 23-03-2010, 01:39 PM
  2. This a long one - AKV
    By Peter_1 in forum Industrial
    Replies: 6
    Last Post: 26-12-2008, 12:47 PM
  3. Q=? h1=? mechanical schematics
    By fridg in forum Technical Speculations
    Replies: 22
    Last Post: 19-03-2006, 02:43 PM
  4. Article in ACH&R News
    By Gary in forum Fundamentals
    Replies: 8
    Last Post: 20-05-2003, 12:27 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •