Results 1 to 3 of 3
Thread: Parameters of SAnyo RCS-TM80BG
Hybrid View
-
24-11-2016, 09:04 PM #1
Parameters of SAnyo RCS-TM80BG
Hello all,
I have a question regarding SANYO control panel and outdoor unit :
During normal operation for heating, the outdoor unit has 2 or 3 different 'speed' of compressor/fans.
Is it possible to force the outdoor unit to the low 'speed' ? Via a parameter set on the control panel ?
I measured the current of the outdoor unit, and I had a first step at 8A, after some minutes, it switch to 13A and then max measured at 18A.
For several reasons, I would like to limit the current at 8A.
Thanks for your help.
Manu.
-
24-11-2016, 09:31 PM #2
Re: Parameters of SAnyo RCS-TM80BG
You have quoted the reference model number of the remote controller, we need to know the model number for the indoor and mostly the outdoor unit.
Brian - Newton Abbot, Devon, UK
Retired March 2015
-
24-11-2016, 10:02 PM #3
Re: Parameters of SAnyo RCS-TM80BG
Hello, thanks of your reply.
The outdoor model is a Winverter 484 from Airpac (climastar). But It is a Sanyo 42,000 BTU with 2 fans.
Indoor unit is a specific unit from Airpac to use it as a Heating Pump Air/water. The indoor unit has a similar control card than indoor units for cooling.
Hope it can help you...
Thanks.