Results 1 to 3 of 3
  1. #1
    Join Date
    Nov 2016
    Location
    Belgium
    Age
    42
    Posts
    2
    Rep Power
    0

    Parameters of SAnyo RCS-TM80BG



    Hello all,

    I have a question regarding SANYO control panel and outdoor unit :

    During normal operation for heating, the outdoor unit has 2 or 3 different 'speed' of compressor/fans.

    Is it possible to force the outdoor unit to the low 'speed' ? Via a parameter set on the control panel ?

    I measured the current of the outdoor unit, and I had a first step at 8A, after some minutes, it switch to 13A and then max measured at 18A.

    For several reasons, I would like to limit the current at 8A.

    Thanks for your help.

    Manu.



  2. #2
    Brian_UK's Avatar
    Brian_UK is online now Moderator I am starting to push the Mods: of RE Site Moderator : and general nice guy
    Join Date
    Mar 2001
    Location
    Dorset
    Age
    69
    Posts
    10,384
    Rep Power
    49

    Re: Parameters of SAnyo RCS-TM80BG

    You have quoted the reference model number of the remote controller, we need to know the model number for the indoor and mostly the outdoor unit.
    Brian - Newton Abbot, Devon, UK
    Retired March 2015
    Please support http://the100project.net/Home

  3. #3
    Join Date
    Nov 2016
    Location
    Belgium
    Age
    42
    Posts
    2
    Rep Power
    0

    Re: Parameters of SAnyo RCS-TM80BG

    Hello, thanks of your reply.

    The outdoor model is a Winverter 484 from Airpac (climastar). But It is a Sanyo 42,000 BTU with 2 fans.

    Indoor unit is a specific unit from Airpac to use it as a Heating Pump Air/water. The indoor unit has a similar control card than indoor units for cooling.

    Hope it can help you...

    Thanks.

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •