Results 1 to 5 of 5
  1. #1
    Join Date
    Nov 2007
    Location
    Sweden
    Posts
    8
    Rep Power
    0

    UNISAB RT Control



    Hello!
    Iīm looking for a manual for a UNISAB RT control for a SABROE PHE Chiller with two CMO-28 mounted. We get the A-1 alarm,however, no alarm light is on

    Best regards

    Thomas
    Industrikyla AB Sweden



  2. #2
    Join Date
    Jan 2006
    Location
    Croatia
    Age
    68
    Posts
    2,299
    Rep Power
    31

    Re: UNISAB RT Control

    Hi, Thomas Cold

    Quote Originally Posted by Thomas Cold View Post
    Hello!
    Iīm looking for a manual for a UNISAB RT control for a SABROE PHE Chiller with two CMO-28 mounted. We get the A-1 alarm,however, no alarm light is on

    Best regards

    Thomas
    Industrikyla AB Sweden
    Maybe is not the best time to ask... but just for curiosity ... how you succeed to setup your PHE chiller without manual? ....

    Anyhow ...if you go to UNISAB II R page with alarms and warnings you probably can see identification number .... the list is below ...

    UNISAB II R alarm-warning ID numbers.pdf

    If you need something more do not hesitate to ask

    Hope this will be of some help.

    Best regards, Josip

    It's impossible to make anything foolproof because fools are so ingenious...

    Don't ever underestimate the power of stupid people when they are in large groups.

    Please, don't teach me how to be stupid....
    No job is as important as to jeopardize the safety of you or those that you work with.

  3. #3
    Join Date
    Nov 2007
    Location
    Sweden
    Posts
    8
    Rep Power
    0

    Re: UNISAB RT Control

    Thankīs Josip!

    Itīs a old chiller that dosenīt work propely! The chiller workīs a few hours than the AL-1 alarm comes and the chiller stop. The alarm will be completely at different times, so there is no logic in the problem.

    We are going to help another ref.company that dosenīt work with this type of unit. They have a customer that need some help. So that why they called us! But the main problem is that we donīt have a service and installation manual for UNISAB RT Control, so if you have one that you can share us, i would be pleased.

  4. #4
    Join Date
    Sep 2007
    Location
    Somerset
    Age
    69
    Posts
    4,758
    Rep Power
    46

    Re: UNISAB RT Control

    Hi Thomas.
    Welcome to the forum.
    I like the fact that you have given some info about yourself (within your profile),
    I have sent you some old info that I have.
    It may not be complete and as I said is dated.
    But it may Help?

    Good luck Grizzly
    Despite the High Cost of Living it still remains Popular!

  5. #5
    Join Date
    Sep 2007
    Location
    Somerset
    Age
    69
    Posts
    4,758
    Rep Power
    46

    Re: UNISAB RT Control

    Hi Thomas.
    A1
    Is a fault on feedback from the motor starter.
    Which on newer unisabs generally means the run signal has timed out.
    Hp switch dropped out? Auxillary contact from motor start panel not made ect.ect

    A common mistake is when locked out on HP.
    The HP switch is reset using the external button. But on the commonly used,dual Danfoss switches there is a internal rest switch.
    Which if not reset the comp / system is still locked out on the above fault.
    Good luck Grizzly
    Despite the High Cost of Living it still remains Popular!

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •