Results 1 to 9 of 9
-
10-05-2006, 01:53 PM #1
Titanium Flat Plate Heat Exchangers
Need a bit of help if possible.
I'm trying to find manufacturers of the above type of heat exchanger.
I know Tranter manufactuer a plate coil but does anyone else.
It needs to be Titanium because it is a sea water application.
Cheers
-
10-05-2006, 03:15 PM #2
Re: Titanium Flat Plate Heat Exchangers
-
16-05-2006, 12:07 AM #3
Re: Titanium Flat Plate Heat Exchangers
MY old company is one of the best with titanium and sea water applications they also use a non titanium material that is less expensive .
Contact Zahid Ayub @ Isotherm in the USA
I think he likes to use isoflx1@aol.com
-
16-05-2006, 06:28 AM #4
Re: Titanium Flat Plate Heat Exchangers
Swep, AIA in Sweden,
It's better to keep your mouth shut and give the impression that you're stupid than to open it and remove all doubt.
-
15-06-2006, 05:39 PM #5
Re: Titanium Flat Plate Heat Exchangers
I agree you should contact the guys at ISO-THERM.
www.iso-therm.com
-
10-09-2006, 04:54 AM #6
Re: Titanium Flat Plate Heat Exchangers
-
10-09-2006, 05:02 AM #7
Re: Titanium Flat Plate Heat Exchangers
-
10-09-2006, 08:38 AM #8
Re: Titanium Flat Plate Heat Exchangers
Hope you could have one immediately.
My supplier Alfa Laval Phils. needs lead time of up to 6 months for Titanium Plate Heat Exchangers.
A lot of my customer use it for boat refrigeration, Evaporators as well as Condensers.
Also, thre are no small ones for a PHE with titanium plates.
What capacity do yo need?
What refrigerant do you intend to use?
-
10-09-2006, 10:47 AM #9
Re: Titanium Flat Plate Heat Exchangers
I confirm alva laval is having 6 months delivery time on these goods
Similar Threads
-
Howto: Calculate coaxial heat exchangers
By JKProSoft in forum Technical SpeculationsReplies: 14Last Post: 10-01-2011, 12:10 PM -
Refrigerant to water heat exchangers
By sunwind in forum Technical DiscussionsReplies: 20Last Post: 24-06-2008, 01:40 PM -
frostles heat pump
By Lc_shi in forum New TechnologiesReplies: 27Last Post: 31-03-2008, 07:53 AM -
Poor Heat Exchangers
By alireza in forum Trouble ShootingReplies: 9Last Post: 21-03-2007, 08:51 PM -
Eroding in pipe heat exchangers
By Carlo Hansen in forum FundamentalsReplies: 7Last Post: 10-04-2005, 08:34 PM