Results 1 to 5 of 5
  1. #1
    Join Date
    Feb 2016
    Location
    Uk
    Age
    48
    Posts
    48
    Rep Power
    0

    samsung wall mount power issue



    working on a samsung wall mount AQV09UGAN power to indoor it has 240v power up to the relay on the indoor board but the relay remains open when powered up.
    The other side of the relay goes strait to the outdoor.
    I have changed the indoor pcb but same fault.
    no power through the relay.
    you can see the relay on the photo 240v to white plug and nothing on the red.
    Does anyone know if there is something else that closes the relay maybe i have been sent the wrong board or is there something else i can check because there is no samsung technical help.
    thanks in advance.
    matt.
    Attached Images Attached Images
    Last edited by Northy303; 22-09-2016 at 06:30 PM.



  2. #2
    Brian_UK's Avatar
    Brian_UK is offline Moderator I am starting to push the Mods: of RE Site Moderator : and general nice guy
    Join Date
    Mar 2001
    Location
    Dorset
    Age
    76
    Posts
    11,192
    Rep Power
    60

    Re: samsung wall mount power issue

    Probably the relay has failed.
    Brian - Newton Abbot, Devon, UK
    Retired March 2015

  3. #3
    Join Date
    Feb 2016
    Location
    Uk
    Age
    48
    Posts
    48
    Rep Power
    0

    Re: samsung wall mount power issue

    Quote Originally Posted by Brian_UK View Post
    Probably the relay has failed.
    Hi brian thanks for your reply i think you are right but i have changed the board so i think they have sent me the wrong one.
    what i am going to do is put the old one back in and bypass the relay and join the 2 lives so the outdoor gets 240.
    As it also has a comms cable I dont think it will make any difference.
    what do u think.

  4. #4
    Join Date
    Feb 2007
    Location
    UK
    Posts
    2,479
    Rep Power
    45

    Re: samsung wall mount power issue

    Quote Originally Posted by Northy303 View Post
    there is no samsung technical help.
    matt.
    Hi Matt,

    Normally you can get very good technical help from any one of Samsung's distributors.
    Depending on where you are based and who you normally buy stuff from:
    - Freedom A/C
    - ESS
    - EasyAir
    - Gallant
    - HRP
    Any of these should be able to assist you.


  5. #5
    Join Date
    May 2006
    Location
    Hayling Island, UK
    Age
    60
    Posts
    143
    Rep Power
    21

    Re: samsung wall mount power issue

    Hi Matt,
    I'd double check you've been sent the correct part - Samsung part n° is DB93-0838G
    Do you get any flashing LEDs (indoor or outdoor) which may indicated an error?
    Also did your supplier tell you that the PCB is likely to need the 'product option code' inputted via the local controller?
    The code you need is 447777d20d
    If you haven't put this code in then the PCB won't work.
    I have the service manual if you need it pm me your email addr.

    Cheers

    Loops
    (at the second of the distributors Viking listed !)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •