Hi,

I have a Blomberg (aka BEKO) KFD9952 XA+ (side-by-side american style). It has been standing for a while and when I switched it on it gave me an error message (4E). With this message it still seemed to work, but the horizontal pillars of the freezer doors went very hot.
Then I found that the condenser/compressor fan is not working and the condenser grill together with the compressor is also getting hot. I tested the fan and this is working fine (when I disconnected and powered up from a different power source). So for some reason the fan is not getting any power. So I assume this can be the reason for the failure.

Can anyone help me troubleshooting further? Or has anyone got the service manual with wiring schematics and descriptions of how enter test mode and explain the codes there?
The main board costs quite a lot, so I dont want to order it just by hoping it will fix everything (if this is the cause at all).