Results 1 to 1 of 1
-
07-10-2016, 10:34 PM #1
Frick Quantum 4.1 Qtalk or Qnet Software
Dear All Frick Compressor/Chiller Users,
We can provide "York frick Qnet/Qtalk" Software which is built to work with quantum 1,2,3 and 4
Qtalk runs on your scada/workstation pc and show live data of your Frick Quantum units.
It requires com/serial port on pc which is easy to find and can connect via rs232,485 or 422.
If Software and Commissioning is required you can send us email and we can do it at a very reason able price. We can do it world wide.
usman@cse-sa.com
Please see attached photos
unnamed (2).jpgunnamed (1).jpgunnamed.jpgIMG-20160903-WA0004.jpgIMG_20160519_164214.jpgLast edited by usmanullah; 15-10-2016 at 06:27 PM. Reason: Solved