Results 1 to 2 of 2
-
19-08-2016, 12:29 PM #1
Registered User
Hey, I am new to : RE
- Join Date
- Aug 2016
- Location
- UK
- Posts
- 2
- Rep Power
- 0
Prestcold K100/0017 motor electrics
I have replaced the starter and run caps and I am still getting nonsense readings from the relay, so I guess it's dying/dead.
The present relay is a White Rodgers RBM 90-"69", but the only labelling on it reads "F128366 - 138100 9211" (which may well be just the original stockist's code?), so no way of telling which exact voltage profile it is.
I have two questions at this stage:
1. Does anyone know what the correct pick-up & drop-out voltages are for an old Prestcold K100?
2. Can anyone point me in the direction of obtaining Prestcold installation/maintainence/repair manuals (or any other relevant literature)?
-
19-08-2016, 07:34 PM #2
Moderator
I am starting to push the Mods: of RE Site Moderator : and general nice guy
- Join Date
- Mar 2001
- Location
- Dorset
- Age
- 76
- Posts
- 11,025
- Rep Power
- 60
Re: Prestcold K100/0017 motor electrics
The F128.... code is a model number as in 128-366-1831xxxx, but I can't find your numbers anywhere.
Have a read of the older thread which asked the same questions.
http://www.refrigeration-engineer.co...or-starter-kitBrian - Newton Abbot, Devon, UK
Retired March 2015
