});


Results 1 to 4 of 4
  1. #1
    Join Date
    May 2009
    Location
    United Kingdom
    Posts
    6
    Rep Power
    0

    GeoClima Chiller



    Afternoon gents,

    Reference this site quite a lot, never had a reason to post until now.
    Trying to help a colleague of mine.
    Our company has inherited a site with 2 x GeoClima chillers GHA-B 2140/66/SP/ECO with the MicroSmart contollers dated 2006.
    We are looking for the manufacturers password. We have the user and service codes. The manufacturers password is four digits long, we can't even seem to be able to select the four asterix to enter the password. Have tried holding down set, menu and various button configurations etc. Are we missing something?

    Any help would be greatly appreciated

    Thanks in advance

    Ian



  2. #2
    Join Date
    Sep 2007
    Location
    Split Croatia
    Age
    52
    Posts
    6,114
    Blog Entries
    6
    Rep Power
    31

    Re: GeoClima Chiller

    Why you will need manufacturer password? It is for editing software, which is proprietary of GeoClima! In that case, you should contact GeoClima!
    Now, when I am officialy citizen off EU, I am looking for decent job! For any job offer please check my profile!

  3. #3
    Join Date
    May 2011
    Location
    england
    Age
    47
    Posts
    5
    Rep Power
    0

    Re: GeoClima Chiller

    we need to access the parameters as the EEV does not appear to close down below 15% and floods the evaporator on low load. We think something is limiting the EEV from closing past 15% within the program as the other chiller closes fully.

  4. #4
    Join Date
    Sep 2007
    Location
    Somerset
    Age
    64
    Posts
    4,606
    Rep Power
    40

    Re: GeoClima Chiller

    Hi N&B.
    Are you getting low discharge Superheat as well.
    Before condemning the exp valve.
    Check your KPA across the evap.
    Only poor and low flows will cause liquid to flood back!
    Just a thought?
    Grizzly
    Last edited by Grizzly; 10-08-2016 at 06:30 AM.
    Despite the High Cost of Living it still remains Popular!

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •