Hi All, just wondering if anyone out there has hands on experience with these units. First time at new control centre with many above ceiling units, already several units showing condensate fault on wallmounted controller. Fan coils have small inline pump connected to end of drain pan operated by two orange/red capacitor like cylinders which make contact at different water levels, the pump is only lifting about 300mm to a gravity drain. Not sure what the control theory is yet, never seen these before, have been unable to find anything on the net, only that this series seems already superseeded by HyPower-Geko which is using a different condensate pump system possibly Blue diamond.
Any tips or advice much appreciated.