Results 1 to 6 of 6
Thread: Hoshizaki IM-45LE
-
12-07-2016, 08:38 PM #1
Hoshizaki IM-45LE
Hi
I have the above ice machine that will no produce any ice.
I have replaced the cube sensor and also recharged the system as nameplate
This is what is happening
On turning the unit on water fills the cube tray and and over fills it then the compressor kicks in the cube tray frosts up for approx 15 minutes. Hot gas defrost comes on the tray motors down and a flood of water no ice!
Any advice would be much appreciated
-
29-07-2016, 09:24 PM #2
Re: Hoshizaki IM-45LE
Does anybody have any experience with this ice machine?
-
30-07-2016, 12:12 PM #3
Re: Hoshizaki IM-45LE
-
03-08-2016, 08:22 PM #4
Re: Hoshizaki IM-45LE
Thanks, I already have the manual I've not really had much time with this ice machine and was looking to be pointed in the right direction with it
-
19-08-2016, 04:52 PM #5
Re: Hoshizaki IM-45LE
Thought I would post an update. I have fixed the unit now that I spent a little more time looking at the problem.
I found that there was a loose wire on the spay pump.
-
19-08-2016, 07:13 PM #6
Re: Hoshizaki IM-45LE
Thanks for the update and glad that you've solved the problem.
Brian - Newton Abbot, Devon, UK
Retired March 2015