Hello all,
Total novice here so please speak slowly. I am converting a micromatic wine kegorator to a 4 tap beer kegorator for my home brew. It is dual chamber for both red and white wine. Each chamber has the Dixell XR60XC digital temp controller, but they only go down to 40 and 54 degrees.
I have found a manual online and can access the the second hidden menu to lower the lower limit temp setting.

http://Www.mtlcool.com/docs/dixel_xr...ser_manual.pdf

Section 7 low set point

It seems it takes the lower temp when I enter it but the temperature never gets close to the 35 degrees I set it at. It actually doesn't seem to move at all.

Any ideas if I may be using the wrong setting or if this is just a limitation of the controller and/or condenser?

Any other ideas on how to achieve the desired temperature if this method won't work?

Thank you in advance!
Rob