Results 1 to 9 of 9
-
17-06-2016, 07:58 PM #1
whirlpool k40 icemachine no power to stat or solonoind
hi all I am working on a k40 ice machine the ones with the heating grid . the problem I have is that there is no power to my cube size stat and consequently my water inlet solonoind I have traced the neutral back( red and blue wire) and traced what has to be the live back through the fuse on the back (which was fine) to the grid transformer terminal marked 0! the wiring diagram is long gone and I believe the tranny must feed the stat and solonoind does anyone have a wiring diagram for one of these as I cannot see why they would link the solonoind to a tranny I think I am chasing my tail .
-
17-06-2016, 10:29 PM #2
Re: whirlpool k40 icemachine no power to stat or solonoind
Can't help directly, sorry but....
Try here..
http://www.whirlpoolk20.co.uk
Scroll down and click on spare parts for a wiring diagram.Brian - Newton Abbot, Devon, UK
Retired March 2015
-
18-06-2016, 11:16 AM #3
Re: whirlpool k40 icemachine no power to stat or solonoind
Try bypassing the bin stat and see what happens.
-
18-06-2016, 11:19 AM #4
Re: whirlpool k40 icemachine no power to stat or solonoind
If memory is right i think the tranny is only for the cutting grid.
-
18-06-2016, 01:03 PM #5
Re: whirlpool k40 icemachine no power to stat or solonoind
Try this site.
http://icemachinesireland.com/media/wysiwyg/pdfs/whirlpool/AGB024_K40.pdf
-
18-06-2016, 03:45 PM #6
Re: whirlpool k40 icemachine no power to stat or solonoind
yeah that's what I think but a wire leads off the back of the tranny directly to the stat that feeds the water inlet solenoid , the other wire is a neutral as I traced it back from the water pump neutral it makes no sense for it to be wired like that though ,nevermind if it's not that I have figured out a way round it (hopefully) .
-
18-06-2016, 03:47 PM #7
Re: whirlpool k40 icemachine no power to stat or solonoind
thank you everybody
-
20-06-2016, 11:05 PM #8
Re: whirlpool k40 icemachine no power to stat or solonoind
Never has there been a more complex wiring diagram produced. Try this one, same diagram just laid out a bit different and makes a lot more sense.
Thanks due to Mr Nike123 who posted it once. :-)Health and safety first..........unless I'm in a hurry.
-
21-06-2016, 04:46 AM #9
Re: whirlpool k40 icemachine no power to stat or solonoind
Correct the wiring diagram which is on the machine somewhere is a joke,mind you ice machines or some of them are heath Robinson!