Results 1 to 5 of 5

Thread: Wireless gauges

  1. #1
    Join Date
    Nov 2011
    Location
    Kent
    Posts
    4
    Rep Power
    0

    Wireless gauges



    I have a yellow jacket mantooth and I this will be a stupid question but high temp pipe clamp, where dose it go on the discharge of the compressor or the liquid line.



  2. #2
    Join Date
    Feb 2007
    Location
    UK
    Posts
    2,477
    Rep Power
    38

    Re: Wireless gauges

    It all depends on what you want to measure.

    - If its on the discharge you will get the discharge superheat.
    - If it is on the liquid line you will get the sub cooling.

    I believe the default for the YJ app is sub cooling, so if that is what you want to see then liquid line it is.


  3. #3
    Join Date
    Nov 2011
    Location
    Kent
    Posts
    4
    Rep Power
    0

    Re: Wireless gauges

    Ok thanks, I was looking at the testo smart probes as they are all wireless

  4. #4
    Join Date
    Feb 2007
    Location
    UK
    Posts
    2,477
    Rep Power
    38

    Re: Wireless gauges

    Quote Originally Posted by Shussey1 View Post
    I have a yellow jacket mantooth.
    Quote Originally Posted by Shussey1 View Post
    Ok thanks, I was looking at the testo smart probes
    ???
    However, same principle applies...


  5. #5
    Join Date
    Nov 2011
    Location
    Kent
    Posts
    4
    Rep Power
    0

    Re: Wireless gauges

    I find the interconnecting cable between the two pressure sensor too short and some times hard to fit

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •