Results 1 to 3 of 3
Thread: compressor capacity question
-
10-05-2016, 08:36 PM #1
compressor capacity question
Hello,
I got a single door kegerator that originally had a 1/6 hp 450 btu r12 compressor.
Coldparts just sent me a 1/8 hp 400 btu r134a compressor. I will be charging it with r134a.
Should I send the compressor back or not. I'm thinking I will lose some capacity just from switching to r134a. Will the cap tube be sized correctly? Or should I change the cap tube based on the supco or JB sizing chart?
This unit will be for personal use so I thought I would save some bucks, and I ordered the compressor from coldparts.com
Any help would be greatly appreciated.
Thanks,
Jake
-
11-05-2016, 09:13 AM #2
Re: compressor capacity question
Faulty fractional Horse Power compressors should be replaced with a suitable match, or at least within 5% +-.
Get on the blower and ask why they sent you a smaller Pot.To the optimist, the glass is half full. To the pessimist, the glass is half empty.
-
22-05-2016, 06:03 PM #3
Re: compressor capacity question
Can you check the capacity that your new compressor gives for R12? I am sure you know, but depending on the refrigerant you use your compressor gives different capacities. Maybe your new compressor gives the same capacity for R12?
Good luck.