Results 1 to 2 of 2
Thread: Convert York YCUZ 880
-
01-05-2016, 05:44 PM #1
Convert York YCUZ 880
Customer is wanting to convert their 100 ton York YCUZ880 from 2 large recips to 4 scrolls and from R-22 to 407C
is it possible to fool the processor on the oil pressure transducer? We can put a thermistor on the oil temp. Any other help would be appreciated.
-
02-05-2016, 06:26 PM #2
Re: Convert York YCUZ 880
Welcome to the forum.
Processor will look for positive differential oil pressure within 30 seconds of start up, i think trip point is below 0.7bar. Is this a packaged unit or remote condenser only?
Are the existing compressors fubar'd or is there another reason for wanting to fit scrolls? If the compressors are J series there used to be a conversion kit for the heads (wave springs etc)Mostly found in the southern part of this green and pleasant land.