Results 1 to 3 of 3
  1. #1
    Join Date
    Oct 2008
    Location
    FRANCE
    Age
    58
    Posts
    13
    Rep Power
    0

    Question CH 530 Replace the interface operator



    Hi All

    I need to replace the interface operator on RTAC 300, bécause the screen is destroyed
    by the sun ray ! not cover in place !!

    My Question: I can use my service tool techwiew for made this ?
    ( download the software and affect all LLID Sensor temp and press. EXV etc..)

    There are à spécific procedure for replace this interface ?

    I use my Techview currently for replace the LLID, but I have never use for this !

    Thanks for all information !!

    Patrick



  2. #2
    Join Date
    Nov 2007
    Location
    Romania
    Posts
    7
    Rep Power
    0

    Re: CH 530 Replace the interface operator

    If is only the touch screen broken,if you buy a new CH530 you can replace ONLY the touch screen and all the setting will remain and you dont need to use the Techwiew.But if you want to replace the CH530 with the Techview you will need the complete model number,confirm code,and serial number and this you will find in the electrical panel on the left side and it is a simple job. Be careful when you type the complete model number not to mistake zero with letter O.If you use Kestrelview save a complete report first,and in the report you will also find the complete model number,confirm code,and serial number.
    Last edited by georgeB; 09-04-2016 at 10:50 PM.

  3. #3
    Join Date
    Sep 2007
    Location
    Somerset
    Age
    69
    Posts
    4,758
    Rep Power
    46

    Re: CH 530 Replace the interface operator

    Hi GeorgeB
    Thanks for being so helpful!
    Grizzly
    Despite the High Cost of Living it still remains Popular!

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •