Results 1 to 3 of 3
Threaded View
-
31-03-2016, 11:03 AM #1
CH 530 Replace the interface operator
Hi All
I need to replace the interface operator on RTAC 300, bécause the screen is destroyed
by the sun ray ! not cover in place !!
My Question: I can use my service tool techwiew for made this ?
( download the software and affect all LLID Sensor temp and press. EXV etc..)
There are à spécific procedure for replace this interface ?
I use my Techview currently for replace the LLID, but I have never use for this !
Thanks for all information !!
Patrick