Hello evryone.

This is my first post, been reading many and have learned a lot, Great forum.

I have a 12v BD35 based refrigeration set up that I have removed from my sailboat.

Its consists of A Danfoss BD35 compressor, a 32x 11 " evaporator plate made out out aluminium and has about 24 feet of passages in it . It has a 6 foot capillary tube and small fan driven condenser .

What I would like to do is change the set up to a system using a TXV with a large receiver drier and a much larger fan driven condenser, one with three cores measuring 9x10 " .

The problem is the Danfoss TXV TN2 with the 0X orifice is still much to big for my setup , Is there any way I could get a machine shop to make a smaller one ? Maybe a few different ones and try them until I get the system working properly?

This system would be much more stable and efficient in the hotter climates that I will be sailing in .

Thanks