Results 1 to 5 of 5
-
03-05-2006, 11:09 AM #1
Timeswitch to control 4x wall-mounts
I am planning 4 wall-mounted separate heatpump splits (in adjacent offices) and the client wants a timeswitch to switch them on in the morning and off in the evening (adjustable), with the room users operating the hand controllers during the daytime on-period.
The equipment planned is Midea Air-conditioning
2 x MSG-18HRN2 (5kw)
2 x MSG-12HRN2 (3.5kw)
http://www.mideaaircon.com/products_info.asp?lid=44
Sadly this kit does not have a timeswitch feature in the controller.
Question: Can someone give a rough indication on how one might wire in a timeswitch to switch the 4x units? Obviously one cannot just cut the power supply at 6:00pm every evening.
Anyone have some ides on this, please?
-
03-05-2006, 11:53 AM #2
Re: Timeswitch to control 4x wall-mounts
Also a good day to you
It's better to keep your mouth shut and give the impression that you're stupid than to open it and remove all doubt.
-
03-05-2006, 12:02 PM #3
Re: Timeswitch to control 4x wall-mounts
.
Sadly, some of these cheap imports do not have the basic functions that most UK users expect.
If the system is capable of auto restart, as you imply, instead of interrupting the main supply, why not put a set of volt-free contacts in the indoor transformer, preferably the 12 v secondary.
Keep the wire run to a minimum to avoid voltage drop. Try it first and introduce a basic fault to check that the memory retains malfunctions if the time switch operates.
Otherwise you?ll have to power the lot off each day.
.
________
Ford F-650Last edited by Argus; 07-02-2011 at 09:08 AM.
-
03-05-2006, 12:09 PM #4
Re: Timeswitch to control 4x wall-mounts
I had a look on the web site that was linked and if you select the wall mounted range then click on the link it shows wiring diagrams for both the indoor and outdoor units. Should be easy enough to find a wire to interupt with a timeclock.
Alternately, you could quote the job with some decent Daikin, timeclock installed on the hard wired remote as standard
-
10-05-2006, 08:19 AM #5
Re: Timeswitch to control 4x wall-mounts
To be honest there will be a lot of work involved to add a Home made time clock feature to those units.
I would also expect the warranty to go as well.
I would suggest Mitsi Heavy FDKA wall unit range, they do the small inveters, with scoll compressors, and they all come with Wired controllers with a 7 day time clock function far easier to program than the Daikin (High light a box) ones :lol:
Being Inverters, they will save on Running costs and claim the 100% TAX back
and they will cost you less than Daikins.
Job done.
Similar Threads
-
Airwell Florida Inverter Air Condition - in need of help
By AndY1 in forum Air ConditioningReplies: 21Last Post: 05-07-2008, 10:48 AM -
Control scenario
By Mike Hopkins in forum Technical DiscussionsReplies: 5Last Post: 14-09-2007, 11:25 AM -
Amcor remote control
By Andy W in forum Air ConditioningReplies: 6Last Post: 24-06-2005, 10:10 PM -
Searle cellar cooler control problem
By iceman007 in forum ElectricalReplies: 6Last Post: 06-07-2004, 08:57 PM -
New Capacity Control Solution
By embrown in forum New TechnologiesReplies: 19Last Post: 30-12-2003, 01:33 PM