Results 1 to 4 of 4
Thread: R410A For -10C Evaporating Temp
-
18-03-2016, 07:10 PM #1
R410A For -10C Evaporating Temp
I was going through Sanyo DC Scroll compressor and it is rated for -15 to 12 C evaporator temperature using R410A. So I was thinking if I could build a system around it for making ice as a thermal storage and need evaporator temp of -10C.
-
18-03-2016, 11:26 PM #2
Re: R410A For -10C Evaporating Temp
Good on you , your point being?
you may need to use a HX as a glycol cooler at -10'c SST at compressor, and possibly get sub zero glycol temps, dependant on compressor performance etc.. and compression ratios, ambient temps etc..
A little more info would help.Last edited by Magoo; 18-03-2016 at 11:36 PM.
-
19-03-2016, 08:31 AM #3
-
20-03-2016, 12:03 AM #4
Re: R410A For -10C Evaporating Temp
Hi Boss.
you obviously want to build an ice bank for thermal storage. You would be best advised to select a low temp scroll designed for the purpose
Earlier I asked for more information on what you wanted to acheive, can you elaborate ?.
are we talking a few kilowatts or meggar watt ice banks.