Motor protection

[beida]

Hi brother

I want to know where I can buy Texas Instruments 2ACE-2C1. Or replacement of it

I looked it up well
And contacted my supplier .. But nothing's

[Brian_UK]

Found this, they're not cheap.
http://www.carbonbrush.com/klixon2ACE.htm

[beida]

Found this, they're not cheap.
http://www.carbonbrush.com/klixon2ACE.htm

Thank mr Brian
Hhhh 500$
Emmmm but it is necessary to protect my dx screw
I sent email and now waiting

[RANGER1]

Not sure what it is but could it be a thermistor relay or something like this

https://www.bitzer.de/shared_media/d...n/st-120-1.pdf

[Grizzly]

Hi brother

I want to know where I can buy Texas Instruments 2ACE-2C1. Or replacement of it

I looked it up well
And contacted my supplier .. But nothing's

Either speak to your local JCI people or contact Prestons via this Link.

http://www.prestoncompressors.com/

They supply motor protection units and the relevant thermistors for York DXS screws.
The ones you fit are very model specific. So its worth talking at least.
Alternatively try talking to Ghaz ( on this forum!) he is very clued up on many types of rebuilds rebuilds and may be able to help?
Grizzly

[beida]

Either speak to your local JCI people or contact Prestons via this Link.

http://www.prestoncompressors.com/

They supply motor protection units and the relevant thermistors for York DXS screws.
The ones you fit are very model specific. So its worth talking at least.
Alternatively try talking to Ghaz ( on this forum!) he is very clued up on many types of rebuilds rebuilds and may be able to help?
Grizzly

Thanks brother