Results 1 to 2 of 2
Threaded View
-
08-03-2016, 12:47 PM #1
Grasso RC411 diameter shaft at the shaft seal point (driver pin)
Hi guys,
i have a little question.
i have the service manual and it gives me the diameter for the shaft journals.
but what i want to know is the correct diameter at the point of the shaft seal(at the driver pin) i measured it at 85.00 mm but wanna know if this is correct and what the margins are seeing that its not in the manual at all.
petermulder1982@hotmail.com
thanks in advance for taking the time to help.