Results 1 to 8 of 8
Thread: Flexi ducting from cassette
-
25-05-2006, 02:46 PM #1
VIP Poster
- Join Date
- Jun 2005
- Location
- Stoke on Trent
- Age
- 62
- Posts
- 588
- Rep Power
- 19
Flexi ducting from cassette
Can anyone point me in the direction of a decent supplier preferbly with an online catalogue to identify components etc for the fitting of flexi ducting, inline fan, grill & back box fed from a cassette, I have a job that I need to to install 2 lots from 2 cassettes. Cheers all.
-
25-05-2006, 04:22 PM #2
Veteran Poster
- Join Date
- Dec 2005
- Location
- Cheshire
- Age
- 39
- Posts
- 264
- Rep Power
- 21
Re: Flexi ducting from cassette
Andy,
Originally Posted by Andy W
Flexible duct should only be used for end connections i.e from grilles and 500mm in length max.
If your fitting a fan then I would recommend the use of solid spiral duct, which would also more than likely need to be insulated if your taking it off a cassette.
As for a supplier I would try www.cclveloduct.co.uk or www.hargreaves-ductwork.co.uk
-
25-05-2006, 06:02 PM #3
Super Moderator
- Join Date
- Oct 2001
- Location
- Nottingham UK
- Posts
- 5,668
- Rep Power
- 51
Re: Flexi ducting from cassette
Ring Alan @ Trade Ventilation Supplies 0115 979 1684, he'll sort you out with the proper kit Originally Posted by Andy W
-
26-05-2006, 07:51 AM #4
VIP Poster
- Join Date
- Jan 2003
- Location
- Crewe, United Kingdom
- Age
- 58
- Posts
- 723
- Rep Power
- 22
Re: Flexi ducting from cassette
Fans and Spares on the Parkhouse Industrial estate?
Karl
-
26-05-2006, 08:16 AM #5
regular poster
- Join Date
- Oct 2005
- Location
- Romania
- Age
- 44
- Posts
- 66
- Rep Power
- 19
Re: Flexi ducting from cassette
http://www.france-air.com/franceair/...st_prod_en.asp
good online catalogue."do not follow where the path may lead. go instead where there is no path and leave a trail" R.W.Emerson
-
26-05-2006, 02:39 PM #6
VIP Poster
- Join Date
- Jun 2005
- Location
- Stoke on Trent
- Age
- 62
- Posts
- 588
- Rep Power
- 19
Re: Flexi ducting from cassette
Hi Karl, I thought about them, I did not even know they had moved until I went to CEF recently and saw them across the road. When I went to them last some years ago when they were situated in Tunstall I found them to be very expensive and most unhelpful, some one who I know recently purchased a 600mm fan blade from them for a woods fan, it cost £90 + vat trade! Originally Posted by Karl Hofmann
-
26-05-2006, 03:07 PM #7
Registered User
Hey, I am new to : RE
- Join Date
- May 2006
- Location
- Altrincham
- Age
- 57
- Posts
- 9
- Rep Power
- 0
Re: Flexi ducting from cassette
SMJ Engineering. Steve Jones. Based in Dukinfield. Really helpfull guy. Will supply or supply and fit. Very familiar with Most Fan Coil types also. Has own delivery driver as well. 07768 513281.
-
26-05-2006, 04:43 PM #8
Moderator
Site Moderator : and general nice guy
- Join Date
- Oct 2003
- Location
- Belgium
- Age
- 62
- Posts
- 5,630
- Rep Power
- 34
Re: Flexi ducting from cassette
Air trade Center
It's better to keep your mouth shut and give the impression that you're stupid than to open it and remove all doubt.
Similar Threads
-
Ceiling cassette enclosures / casings
By old time fridgy in forum Air ConditioningReplies: 12Last Post: 30-03-2011, 12:10 PM -
LG Cassette
By Abe in forum Air ConditioningReplies: 16Last Post: 23-11-2005, 10:12 PM -
LG Cassette
By Abe in forum Air ConditioningReplies: 16Last Post: 01-07-2005, 07:31 AM -
LG 10.5 kw cassette timer problem
By Andy W in forum Air ConditioningReplies: 10Last Post: 25-06-2005, 07:09 PM -
Ideal Pump for Rosvik Cassette
By Krups in forum Air ConditioningReplies: 12Last Post: 08-03-2005, 08:38 PM
