Results 1 to 6 of 6
Thread: york YT REBUILD MANUAL
-
25-02-2016, 02:50 PM #1
york YT REBUILD MANUAL
Hi , I am looking for a rebuild manual for a york YT chiller need to have bearing and thrust tolerances please .
compressor is a YDTJ-CB chiller is a YT E3 E3 C3 CL F
-
26-02-2016, 08:47 AM #2
Re: york YT REBUILD MANUAL
You probably want document york 160.48-m1
Pretty hard to come by..
I've only ever seen the odd screenshotLast edited by HVACRsaurus; 26-02-2016 at 09:00 AM.
-
26-02-2016, 03:41 PM #3
Re: york YT REBUILD MANUAL
yeah, I hunted for it for ages , ill make a copy when I get one
-
28-02-2016, 09:57 PM #4
Re: york YT REBUILD MANUAL
hi ive got parts manual ,if your interested
-
02-03-2016, 02:36 PM #5
Re: york YT REBUILD MANUAL
thanks Ghaz I have one already it was posted on the JCI documents page ,I'm still trying through the old freinds network to get 160.48-M1.
Happy to share any I have.
-
03-05-2016, 03:13 PM #6
Re: york YT REBUILD MANUAL
Hi, I have a copy of the 160.48-M1 service instructions but its for a YDTL/LTL 108 through 144, chances are the settings your after would be the same but there aren't any listed apart from a maximum total run out of the bearings at 0.01" T.I.R