Results 1 to 4 of 4
Thread: Ranco a10 1463
-
20-02-2016, 03:14 PM #1
regular poster
- Join Date
- Mar 2005
- Location
- uk
- Age
- 53
- Posts
- 42
- Rep Power
- 0
Ranco a10 1463
Does anyone know where I could get a Ranco a10 1463 stat from.its very old and is off an old Jensen interceptor,there is an arm which is worked from a vacuum actuator that gets its signal from the selector switch in the cab.the sensor from the stat goes into the evaporator I am guessing the stat is a fixed set point.looked at Ranco stats there is some that operate within temp range I want but I would like one with the on/off lever on side.does anyone know of anything about these. Thanks
-
20-02-2016, 04:38 PM #2
Moderator
I am starting to push the Mods: of RE Site Moderator : and general nice guy
- Join Date
- Mar 2001
- Location
- Dorset
- Age
- 76
- Posts
- 11,025
- Rep Power
- 60
Re: Ranco a10 1463
All I can find is the VB7 replacement 'stat, sorry.
Brian - Newton Abbot, Devon, UK
Retired March 2015
-
20-02-2016, 04:54 PM #3
Moderator
Site Moderator : and general nice guy
- Join Date
- Sep 2003
- Location
- ISRAEL
- Age
- 72
- Posts
- 4,248
- Rep Power
- 46
Re: Ranco a10 1463
Is this the one?
http://www.alibaba.com/product-detai...7.29.46.7P71ck
-
20-02-2016, 07:47 PM #4
Moderator
I am starting to push the Mods: of RE Site Moderator : and general nice guy
- Join Date
- Mar 2001
- Location
- Dorset
- Age
- 76
- Posts
- 11,025
- Rep Power
- 60
Re: Ranco a10 1463
Thanks Chemical, trouble is I bet he doesn't want 300
But looking at that picture I'm sure that the operating lever could be transferred from the old 'stat.Brian - Newton Abbot, Devon, UK
Retired March 2015
