Hi All,

I have a customer with two old Carrier 30HXC175 Chillers. each is missing 1 compresser. The customer wants to remove one compresser from one chiller and install it onto the other. Then completely replace the chiller with no compressers remaining on it. My question is, I have informed him that the switch gear, oil and filters, gaskets will need to be replaced. I just want to be sure I'm not overlooking something on this job. each of these chillers are 20-25 years old. Do you think it is a worthwhile gamble to use the comp from one chiller to get the other one up and running?