Results 1 to 6 of 6
Thread: Refrigerant Pressure Logger
-
23-01-2016, 10:52 PM #1
Refrigerant Pressure Logger
I am looking to purchase a Logger to measure and log the refrigerant pressure of a system which uses R410.
Does anyone have any recommendation for the make and model etc ?
BTW I will be going to the RAC show at the NEC in February to look over the stands to see if there is anything suitable there.
thanks Bob
-
23-01-2016, 11:11 PM #2
Re: Refrigerant Pressure Logger
.
The simplest would be a digital set of gauges.
I have used a few Testo sets and I have a Rothenberger.
I can't say I'm too familiar with the Rothenberger but the
Testo's are worth their weight in gold.
It will log about a months worth of data. Pressure and temps from
both high and low sides and it will plot at any interval from seconds
upwards.
You need the middle range one, 570 I think (you'll need to check) but
is an excellent tool.
The Rothenberger looks great and does measure I think but I have not
used it, so can't say one way or the other.
Rob
... ... -. .----. - / -- --- .-. ... . / -.-. --- -.. . / --. --- --- -..
-
24-01-2016, 07:00 PM #3
- Join Date
- Sep 2007
- Location
- Split Croatia
- Age
- 57
- Posts
- 6,151
- Blog Entries
- 6
- Rep Power
- 36
Re: Refrigerant Pressure Logger
Last edited by nike123; 24-01-2016 at 07:05 PM.
-
25-01-2016, 11:29 AM #4
Re: Refrigerant Pressure Logger
.
KISS.
Keep It Simple Stu-stu-stu-stuuuuu. Keep It Simple Silly.
Looks good.
Regards
Rob
... ... -. .----. - / -- --- .-. ... . / -.-. --- -.. . / --. --- --- -..
-
25-01-2016, 08:33 PM #5
Re: Refrigerant Pressure Logger
Thanks Rob and Nike
Checked all the loggers mentioned it does seems that the Testo 570 would be the best for me for the job I had in mind.
I wanted to leave the manifold on the systems over an extended period such as overnight and then plot the pressures and temps on the computer at a later date.
Do you know if the Imanifold has the facility to log the recorded data ?
thanks bob
-
25-01-2016, 10:14 PM #6
Re: Refrigerant Pressure Logger
bobjob,
Here's a link which answers all the questions.
http://imanifold.com/