Results 1 to 10 of 10

Hybrid View

  1. #1
    Join Date
    Mar 2011
    Location
    Tangerang
    Age
    37
    Posts
    57
    Rep Power
    14

    Brazing technique

    Which one is better, brazing use dual torch or single torch ?
    Attached Images Attached Images

  2. #2
    Join Date
    Sep 2007
    Location
    Somerset
    Age
    69
    Posts
    4,758
    Rep Power
    46

    Re: Brazing technique

    Hi Aria.
    Some of the main questions to ask are -
    Is the mass of the joint to be Brazed large enough to require the extra heat generated by a twin torch?

    Can the extra heat be controlled so as to not damage items nearby?
    Using the extra torch can ensure an even heat application, which will give greater uniform penetration.

    Conversely, Is a more local heat required?
    Which a single torch can provide, it is rare in fridge work where 2 torches are necessary.

    Also the gas consumption makes it an issue for site work, if you are workshop based then it is an easier option to adopt.

    Dual torches are fairly aggressive in their heat application so are less versatile.

    At the end of the day, its all about how much heat you want or need to apply and of course.

    What is the minimum needed to achieve a good result.
    I for one rarely use a dual torch but have been known from time to time I have enlisted assistance from a second person holing a second torch.

  3. #3
    Join Date
    Aug 2006
    Location
    england
    Age
    49
    Posts
    3,874
    Rep Power
    46

    Re: Brazing technique

    I would say for production work in a factory a dual torch is better but for working out in the field, repairing or installing stuff a single is a better choice.
    Mostly found in Oxfordshire, UK :)

  4. #4
    Join Date
    Sep 2007
    Location
    Split Croatia
    Age
    57
    Posts
    6,175
    Blog Entries
    6
    Rep Power
    36

    Re: Brazing technique

    On small pipes with little maneuvering place around, I usually use Gloor two headed torch! Excellent for not burning anything around! Flames are directed at 180° to each other and almost nothing around is damaged by flame. Also, time for preheating and brazing is halved!
    It takes some practice for the brain to adapt, but after that, it is much easier than with single head. It is my first choice for all joints including and below 18 mm diameter pipe!

  5. #5
    Join Date
    Feb 2007
    Location
    UK
    Posts
    2,479
    Rep Power
    45

    Re: Brazing technique

    Simple...

    The one that is held by an experienced engineer!


  6. #6
    Join Date
    Sep 2007
    Location
    Somerset
    Age
    69
    Posts
    4,758
    Rep Power
    46

    Re: Brazing technique

    Quote Originally Posted by The Viking View Post
    Simple...

    The one that is held by an experienced engineer!

    Ouch!
    But true all the same!
    Grizzly

  7. #7
    Join Date
    Sep 2003
    Location
    ISRAEL
    Age
    72
    Posts
    4,266
    Rep Power
    46

    Re: Brazing technique

    One of the things to remember, Always the herder metal on the outside of the brazed joint.

  8. #8
    Join Date
    Mar 2011
    Location
    Tangerang
    Age
    37
    Posts
    57
    Rep Power
    14

    Re: Brazing technique

    Thank you for your reply.
    now i'm already move to another company. My old company use single torch, with smaller leakage (by ppm) than my new company that use dual torch. Is there any critical check point, especially for brazing steel to copper? i.e technique lubricating flux, or material flux selection and etc

  9. #9
    Join Date
    Mar 2011
    Location
    Tangerang
    Age
    37
    Posts
    57
    Rep Power
    14

    Re: Brazing technique

    about fluxing method, which one is better, flux lubricating on pipe or flux mixing on filler (heat by flame) ?

  10. #10
    Join Date
    Sep 2003
    Location
    ISRAEL
    Age
    72
    Posts
    4,266
    Rep Power
    46

    Re: Brazing technique

    Its only a matter of comfort and cost.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •