Results 1 to 2 of 2
  1. #1
    Join Date
    Aug 2014
    Location
    Norway
    Age
    48
    Posts
    26
    Rep Power
    0

    Thumbs down Air-purger problems



    I have a thermostatic air-purger. I am not shure it works properly. Therefor I have a question:
    If I start the purger normally, and open for NH3 inlet from the recievers during operation, and close the air outlet, will the air gather on top of the purger and make the top ice-free or will it only go back into the system?
    When I run it for some time and then try to open air-outlet, it comes only NH3.
    And how long must I wait before there is some air in the purger?
    I have about 8000 kg of ammonia inside my system
    Last edited by marthe1994; 30-09-2015 at 11:05 PM.



  2. #2
    Join Date
    May 2007
    Location
    Auckland
    Age
    67
    Posts
    3,362
    Rep Power
    31

    Re: Air-purger problems

    What brand of purger do you have?

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •