Results 1 to 8 of 8
Thread: Redoing an allignment
Threaded View
-
Redoing an allignment
Going through some old pictures and found this.
Ship that usually use our company had an overhauled compressor installed, we were over our head in work, someone got a crash course in aligning using dials.
compressor had been running for two hours and I had just gotten in the door when I got the call
https://drive.google.com/open?id=0B3...zlLN1d1czZISVk
Those couplings can take a beating, but this was too much, luckily we had an old one I could steal the pins and rubber of off
*************EDIT*************
Was thinking I'd keep the load of the RE server, here are the uploads:Last edited by Tycho; 04-09-2015 at 07:03 PM. Reason: trying to remove the attached pictures
-Cheers-
Tycho