Results 1 to 5 of 5
-
01-09-2015, 12:14 AM #1
3/16" and 1/4" tubing pressure drop tables
Does anyone have such a beastie? I can't seem to find anything on the tinterweb
Cheers
-
01-09-2015, 03:20 AM #2
Re: 3/16" and 1/4" tubing pressure drop tables
Hi Mike,
check engineeringtoolbox.com there is a load of info available
-
01-09-2015, 04:41 AM #3
Re: 3/16" and 1/4" tubing pressure drop tables
maybe here? http://www.copper.org/
-
01-09-2015, 03:01 PM #4
Re: 3/16" and 1/4" tubing pressure drop tables
Hi Mike
Is this for distributor lead sizing ?
-
03-09-2015, 12:32 PM #5
Re: 3/16" and 1/4" tubing pressure drop tables
I have to make a 1 ton liquid condenser and I have the tube runs and diameter for a air cooled one. I'm trying to match, as closely as possible, the volume, and pressure drop of the current air one. I will be up sizing the tubing from 4 parallel runs of ~5mm or 3/16 tube to 5/16 tube with perhaps 2 parallel runs. Sound simple enough, haha.
Engineering toolbox seems to stop at 1/2" tube and the tables I have from Copper institute (not institute of UK policemen), seems to stop there as well.Last edited by MikeHolm; 03-09-2015 at 12:38 PM.