Results 1 to 12 of 12

Thread: Carlyle 06N

  1. #1
    Join Date
    Oct 2012
    Location
    Russia
    Age
    42
    Posts
    392
    Rep Power
    18

    Carlyle 06N



    Hi.
    Can't find a manual for rebuilding of that compressor. Оnly find instructions for the replacement of the multiplier.
    Anyone can help?



  2. #2
    Join Date
    Sep 2007
    Location
    Somerset
    Age
    69
    Posts
    4,758
    Rep Power
    46

    Re: Carlyle 06N

    Hi my friend.
    An email to both of your email addresses that I have has been sent.

    Follow the link to the file which you can then download, only it was too big to upload or email.
    Grizzly

  3. #3
    Join Date
    Oct 2012
    Location
    Russia
    Age
    42
    Posts
    392
    Rep Power
    18

    Re: Carlyle 06N


  4. #4
    Join Date
    Aug 2006
    Location
    England
    Posts
    495
    Rep Power
    21

    Re: Carlyle 06N

    Hi they are really easy to rebuild,once you get the gear wheels off,tools you need are a big gear puller,E14 torque socket,18mm socket,19mm socket,set off feeler guages,and a bottle off map gas to heat the bearing rings on and off and a 19mm spanner.leave discharge clearance of 2thou,

  5. #5
    Join Date
    Oct 2012
    Location
    Russia
    Age
    42
    Posts
    392
    Rep Power
    18

    Re: Carlyle 06N

    I never rebuild them. Sow it will be intersting.

    Todays work. Will be repair it.
    20150815113916.jpg20150815115030.jpg

  6. #6
    Join Date
    Aug 2006
    Location
    England
    Posts
    495
    Rep Power
    21

    Re: Carlyle 06N

    Hi that picture is not an carrier 06n screw compressor

  7. #7
    Join Date
    Dec 2007
    Location
    australia
    Posts
    3,356
    Rep Power
    39

    Re: Carlyle 06N

    Before rebuilding, what went wrong to cause it?
    Wrong direction for whatever reason or something else!

    Is it worth getting a new one for such a small machine.

  8. #8
    moideen's Avatar
    moideen is offline Veteran Poster I am starting to push the Mods: of RE
    Join Date
    Apr 2008
    Location
    u.a.e
    Age
    48
    Posts
    417
    Rep Power
    22

    Re: Carlyle 06N

    Quote Originally Posted by Grizzly View Post
    Hi my friend.
    An email to both of your email addresses that I have has been sent.

    Follow the link to the file which you can then download, only it was too big to upload or email.
    Grizzly
    hi friend,

    please send to me,i need that manual.
    thanks
    moideen

  9. #9
    Join Date
    Oct 2012
    Location
    Russia
    Age
    42
    Posts
    392
    Rep Power
    18

    Re: Carlyle 06N

    Its Bitzer compressor. My fault.
    Repair the compressor at night, and forgot to tighten the bolts on nuts of rotors. 20 seconds and this result). I milled the discharge flange and ends of the rotors. Add spacers under the bearings and the motor rotor.

  10. #10
    Join Date
    Jul 2010
    Location
    fiji islands
    Age
    68
    Posts
    14
    Rep Power
    0

    Re: Carlyle 06N

    I have a problem with searching a table on maximum / minimum wear limit for Bitzer semi hermetic compressor S4G-12.2 I tried searching every Bitzer technical information and still could not find anything on limit wears.
    It is so worrying too that sales agents does not provide such vital information as it would greatly help in sizing up compressor rotating components that are badly scored and needing machining.
    Anyone has a clue where to get this table on limits.

  11. #11
    Join Date
    Apr 2014
    Location
    Sweden
    Posts
    2
    Rep Power
    0

    Re: Carlyle 06N

    Hi
    I am looking for a Manual for removing the gear disc. have tried with heating the disc and pulling it with a gearpuller.

  12. #12
    Join Date
    Apr 2014
    Location
    Sweden
    Posts
    2
    Rep Power
    0

    Re: Carlyle 06N

    can you send the link to med too? adrian.edberg@huurre.se

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •