Results 1 to 10 of 10
  1. #1
    Join Date
    May 2014
    Location
    Moskow
    Age
    56
    Posts
    22
    Rep Power
    0

    Chiller YORK YCIV0840 Baseplate



    Hello all
    chiller York YSIV0840
    Faulty pump glycol
    The display shows: SUS1 LOCKOUT : HIGH VSD BASEPLATE TEMP.
    Please, provide technical support and help
    Sincerely, Anatoly



  2. #2
    Join Date
    May 2014
    Location
    Moskow
    Age
    56
    Posts
    22
    Rep Power
    0

    Re: Chiller YORK YCIV0840 Baseplate

    amendment YCIV0840SA50VAB

  3. #3
    hookster's Avatar
    hookster is offline Veteran Poster I am starting to push the Mods: of RE
    Join Date
    Apr 2007
    Location
    Hampshire
    Posts
    431
    Rep Power
    25

    Re: Chiller YORK YCIV0840 Baseplate

    Hi Anatoly
    Is your glycol pump ok? Check glycol level.
    Check the cabinet fan or you may have a faulty sensor
    I love the smell of Ammonia in the morning!

  4. #4
    Join Date
    May 2014
    Location
    Moskow
    Age
    56
    Posts
    22
    Rep Power
    0

    Re: Chiller YORK YCIV0840 Baseplate

    Hi hookster
    The pump is faulty.
    It was the starting block with a broken pump.
    Tell me where the sensor?
    What are the terminals connected?
    Do I need to manually reset this accident?

  5. #5
    moideen's Avatar
    moideen is offline Veteran Poster I am starting to push the Mods: of RE
    Join Date
    Apr 2008
    Location
    u.a.e
    Age
    42
    Posts
    417
    Rep Power
    16

    Re: Chiller YORK YCIV0840 Baseplate

    Quote Originally Posted by *****959 View Post
    Hi hookster
    The pump is faulty.
    It was the starting block with a broken pump.
    Tell me where the sensor?
    What are the terminals connected?
    Do I need to manually reset this accident?
    you said already the glycol pump is faulty.i dnt know what type of pump fault. repair or replace it.

  6. #6
    Join Date
    May 2014
    Location
    Moskow
    Age
    56
    Posts
    22
    Rep Power
    0

    Re: Chiller YORK YCIV0840 Baseplate

    The pump is already engaged may replace a new one
    problem
    Display Indication Sus1 BLOCK: HIGH TEMPERATURE IRR baseplate.
    Removing the accident and where the temperature sensor

  7. #7
    Join Date
    May 2014
    Location
    Moskow
    Age
    56
    Posts
    22
    Rep Power
    0

    Re: Chiller YORK YCIV0840 Baseplate

    amendment SUS1 LOCKOUT : HIGH VSD BASEPLATE TEMP.

  8. #8
    moideen's Avatar
    moideen is offline Veteran Poster I am starting to push the Mods: of RE
    Join Date
    Apr 2008
    Location
    u.a.e
    Age
    42
    Posts
    417
    Rep Power
    16

    Re: Chiller YORK YCIV0840 Baseplate

    "Removing the accident"cannot understand. what is the glycol level? if glycol level is low, base plate temp will go high.

  9. #9
    Join Date
    May 2014
    Location
    Moskow
    Age
    56
    Posts
    22
    Rep Power
    0

    Re: Chiller YORK YCIV0840 Baseplate

    circuit status off
    where the temperature sensor is installed

  10. #10
    Join Date
    Apr 2010
    Location
    Qatar
    Age
    37
    Posts
    27
    Rep Power
    0

    Re: Chiller YORK YCIV0840 Baseplate

    Leave sensor location it is on PCB you can not do anything...... If u replaced Glycol pump just topup glycol.......untill overflow then close cap.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •