Results 1 to 5 of 5
Thread: Free software, hm but not all
-
24-04-2006, 10:53 PM #1
Free software, hm but not all
Hello,
hope this will make some happy some maybe not becuse there is a lot to read and learn.
Dear gentlemen, links are here help yourself, please:
http://www.bfrl.nist.gov/info/software.html
MOIST
User-friendly, personal computer program that predicts the one-dimensional transfer of heat and moisture. MOIST 3 is designed to run on any IBM-compatible personal computer having a Microsoft Windows operating system
EVAP-COND
Simulation models for a finned-tube evaporator and condenser
CYCLE_D
Vapor Compression Cycle Design Program
http://www.bfrl.nist.gov/IAQanalysis/software/index.htm
CONTAM
Multizone indoor air quality and ventilation analysis computer program designed to help you predict: Airflows, Contaminant Concentrations, and Personal exposure.
REFLEAK
Leak/Recharge Simulation Program for Refrigerant Mixtures
Your comments, as always, are welcome
Best regards,
Josip
-
25-04-2006, 09:49 AM #2
Re: Free software, hm but not all
I've been using evap-cond and it is a very useful tool.
-
24-11-2007, 04:10 PM #3
-
25-11-2007, 10:14 AM #4
Re: Free software, hm but not all
No, I didn't cross check the results, so I can't confirm the results are reliable, though I don't see any reason why they shouldn't
-
24-11-2010, 10:14 AM #5
Re: Free software, hm but not all
Someone have a version of Refleak?????
I buy it from NIST (190$) but it doesn't work!!
And I have to do some simulation urgently!!
Someone can help me???
Similar Threads
-
Free conversion software I use
By Peter_1 in forum Tools and CalculatorsReplies: 13Last Post: 23-12-2010, 11:57 AM -
Free Software, Bèta vers.: Designbuilder
By Peter_1 in forum Tools and CalculatorsReplies: 2Last Post: 05-01-2006, 12:01 AM -
Free Office Software
By frank in forum Computers & the InternetReplies: 0Last Post: 06-04-2005, 07:48 PM -
Energy Plus Software - Free
By Peter_1 in forum Tools and CalculatorsReplies: 0Last Post: 18-10-2004, 06:29 AM -
Energy PLus software FREE
By Peter_1 in forum Tools and CalculatorsReplies: 0Last Post: 19-04-2004, 07:14 AM