Results 1 to 7 of 7
Thread: Tonon forty water chiller ,HELP
-
07-04-2015, 07:51 PM #1
Tonon forty water chiller ,HELP
Tonon forty water chiller
Model galaxy 154
This unit has an error code acf9 which equates to a parameter fault. The other fault is aefl which is a flow error even though the pump isn't being given a run signal
The controller is a dixell ipro chill with xweb 500.
What I really need is pass codes so I can access and interrogate the controller and find out if anyone is familiar with this thing
-
07-04-2015, 07:57 PM #2
Re: Tonon forty water chiller ,HELP
Default code is 321
-
07-04-2015, 10:15 PM #3
Re: Tonon forty water chiller ,HELP
Cheers chemi , il give that a go tommorow
-
08-04-2015, 08:00 AM #4
Re: Tonon forty water chiller ,HELP
Unfortunatly that didn't work. Thanks anyway
-
08-04-2015, 11:37 AM #5
Re: Tonon forty water chiller ,HELP
Sorry, try contact Dixel UK, they might be useful.
-
09-04-2015, 07:29 PM #6
Re: Tonon forty water chiller ,HELP
1234 is level2 password
-
25-04-2015, 12:37 AM #7
Re: Tonon forty water chiller ,HELP
Hopefully your issue sorted? If not....Dixell Ichill series can be a problem because custom passwords can be set by users. Try default password 1 level 1, 2 level 2, 3 level 3.
Probably best to view and set parameters through XWEB, rather than on controller keypad.
If your XWEB has remote access through IP address - you can set up the Dixell controller from remote location....I could do it from Australia!