Results 1 to 10 of 10
Thread: suction accumulator selection
Threaded View
-
24-04-2006, 10:04 AM #1
VIP Poster
I am starting to push the Mods: of RE
- Join Date
- Dec 2004
- Location
- Weihai,China
- Posts
- 800
- Rep Power
- 20
suction accumulator selection
How to select suction accumulator ? My experience is select capacity to about half of system capacity.
I wonder if there's any rules of thumb about it
regards
LCI hear...I forget;I see...I remember;I do...I understand
Similar Threads
-
Suction gas <-> liquid line heat exchange and performance gains
By DaBit in forum Technical SpeculationsReplies: 30Last Post: 18-05-2010, 01:52 PM -
MP66 & Compressor Overheating
By Intermez in forum Technical DiscussionsReplies: 111Last Post: 13-04-2010, 08:58 PM -
Suction pressure problems on TS units at low ambient temps
By nova in forum TransportReplies: 10Last Post: 18-03-2006, 07:35 PM -
Hot Gas defrost suction pressure regulation
By 87mustang in forum Technical SpeculationsReplies: 5Last Post: 05-08-2005, 07:25 AM -
Suction temp
By Temprite in forum CommercialReplies: 18Last Post: 30-05-2005, 10:33 AM
